All Balls Racing ABR-80-2001 12 Volt Generator Black (as OEM replacement) for Big Twin 65-69/Sporsters 65-81

Description for 12 Volt Generator – Black. Fits as OEM replacement for Big Twins 1965-1969 & Sporsters 1965-1981.

Features & Benefits:-

• Each Generator is Pre-Tested by the Manufacturer

• Can be used to replace any H-D Generator from 1936-84

• Matches OEM Specifications

• Double sealed Bearing for longer life

• Needle Bearing with High temp lubricant

• High Temp epoxy Armature

• Replaces OEM # 29975-65

• Replaces OEM # 29978-77A

Tech Tips:-

• Replacing a 1982-84 Sporster Hitatchi 65B Generator you must purchase OEM 31035-58 Oil Deflector & re-use your original generator gear.

• Replacing 1936-1957 6V 3 brush generator use OEM 31035-58 oil deflector, discard the original spring and old deflector. Cam cover & crankcase mount holes may need to be drilled to accept the 5/16 mount bolts.

• Check for clearance on foot clutch models.

• Polarizing:- With the motor off connect the in.Fin. terminal to ground and momentarily flash the in.Ain. terminal with positive. Remove ground from in.Fin. terminal. If you have properly installed a working regulator it will turn on and ground the in.Fin. terminal in which case you will not need to use an external ground.

• Caution! Do not flash the in.Fin. terminal. This will damage the regulator.

• Caution! Failure to Polarise the Generator correctly may result in a burnt-out aramture

People who Buy this Product also Purchase:-

• Generator Mount Gasket, JGI-30143-58

• Oil Deflector EMP-A-31035-58

• Generator Drive Gear EMP-A-31070-58