S&S Cycle SS330-0343 HP103C Chain Drive Camshaft Kit for Twin Cam 07-17/Dyna 2006

S&S Cycle

SKU: SS330-0343

S&S Cycle SS330-0343 HP103C Chain Drive Camshaft Kit for Twin Cam 07-17/Dyna 2006

Available - Ready For Delivery

$759.00

Or 4 payments of $189.75 with

SS330-0343

Description

Description for S&S Cycle HP103C Chain Drive Camshaft Kit

• Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended.

• To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.

• Quick installation and Easy Start Cams allow stock starter to start any engine.

• Kit contains cams, gearcover gasket, cam bearings, and instructions.

• Great way to increase performance at an affordable price

• Quick installation - reuse many stock components

• Kit contains 635HO camsshafts, Installation Kit: gearcover gasket, bearings, retaining ring, o-ring, thread lock,Instructions

• 2005-up stock valve springs will handle camshafts with lift up to 0.585". If a camshaft with higher lift is installed, high performance valve springs capable of handling a greater lift must be used. Cams with over 0.585" of lift will cause interference between the valve spring top collar and the valve seal with stock cylinder heads

• HP103 Camshafts are designed as bolt in cams for engines with 103 and stock 9.7:1 compression up to 10.5:1. Works well with stock, un-ported heads, but is great for S&S Cycle CNC ported heads. Best power in the higher rpm range, 3000-6000 rpm.

• Bolt-in cam for stock 103 engines


Product Specs for S&S Cycle HP103C Chain Drive Camshaft Kit

Centerline Exhaust:101.5°
Centerline Intake:102.7°
Duration Exhaust @ .053:251°
Duration Intake @ .053:249°
Grind:HP103C Camshaft
Lift:.575″
Lift @ Top Dead Center Exhaust:.206″
Lift @ Top Dead Center Intake:.199″
Manufacturer Part Number:330-0343
Sold in Units:Kit
Warehouse Part Number:SS330-0343

(SS330-0343)

Fitment

Fitment Notes & Exceptions

  • Installer must check for coil bind, valve-to-valve clearance, and valve-to-piston clearance
  • Due to inherent characteristics of gear-driven cams, you may experience greater valve train noise
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • Cam bearings and gaskets must be replaced when installing new cams
  • High-lift valve springs are required to run these cams in all models

 

**Please Note: The fitment information below has been generated as a guide and may not be 100% accurate. Please contact us if you require further assistance.

  • Harley Davidson Dyna Fat Bob FXDF: 2008-2017
  • Harley Davidson Dyna Low Rider FXDL/I: 2007-2017
  • Harley Davidson Dyna Low Rider S FXDLS: 2016,2017
  • Harley Davidson Dyna Street Bob FXDB/I: 2007-2017
  • Harley Davidson Dyna Super Glide Custom FXDC/I: 2007-2014
  • Harley Davidson Dyna Super Glide FXD/I: 2007,2008,2009,2010
  • Harley Davidson Dyna Switchback FLD: 2012,2013,2014,2015,2016
  • Harley Davidson Dyna Wide Glide FXDWG/I: 2007-2017
  • Harley Davidson Electra Glide Classic FLHTC/I: 2007-2013
  • Harley Davidson Electra Glide Standard FLHT/I: 2007,2008,2009
  • Harley Davidson Electra Glide Ultra Classic FLHTCU/I: 2007-2016
  • Harley Davidson Electra Glide Ultra Classic Low FLHTCUL: 2015,2016
  • Harley Davidson Electra Glide Ultra Limited FLHTK: 2010-2016
  • Harley Davidson Electra Glide Ultra Limited Low FLHTKL: 2015,2016
  • Harley Davidson Freewheeler FLRT: 2015,2016
  • Harley Davidson Road Glide Custom FLTRX: 2010,2011,2012,2013
  • Harley Davidson Road Glide FLTR/I: 2007,2008,2009
  • Harley Davidson Road Glide FLTRX: 2015,2016
  • Harley Davidson Road Glide Special FLTRXS: 2015,2016
  • Harley Davidson Road Glide Ultra FLTRU: 2011,2012,2013,2016
  • Harley Davidson Road King Classic FLHRC/I: 2007-2013
  • Harley Davidson Road King Custom FLHRS/I: 2007
  • Harley Davidson Road King FLHR/I: 2007-2016
  • Harley Davidson Softail Blackline FXS: 2011,2012,2013
  • Harley Davidson Softail Breakout FXSB: 2013,2014,2015,2016,2017
  • Harley Davidson Softail Cross Bones Springer FLSTSB: 2008,2009,2010,2011
  • Harley Davidson Softail Custom FXSTC/I: 2007,2008,2009,2010
  • Harley Davidson Softail Deluxe FLSTN/I: 2007-2017
  • Harley Davidson Softail Deuce FXSTD/I: 2007
  • Harley Davidson Softail Fat Boy FLSTF/I: 2007-2017
  • Harley Davidson Softail Fat Boy Lo FLSTFB: 2009-2016
  • Harley Davidson Softail Fat Boy S FLSTFBS: 2016,2017
  • Harley Davidson Softail Heritage Classic FLSTC/I: 2007-2017
  • Harley Davidson Softail Night Train FXSTB/I: 2007,2008,2009
  • Harley Davidson Softail Rocker C FXCWC: 2007,2008,2009,2010,2011
  • Harley Davidson Softail Rocker FXCW: 2008,2009,2010,2011
  • Harley Davidson Softail Slim FLS: 2012-2017
  • Harley Davidson Softail Slim S FLSS: 2016,2017
  • Harley Davidson Softail Springer Classic FLSTSC/I: 2007
  • Harley Davidson Softail Standard FXST/I: 2007-2012
  • Harley Davidson Street Glide FLHX/I: 2007-2016
  • Harley Davidson Street Glide Special FLHXS: 2014,2015,2016
  • Harley Davidson Street Glide Trike FLHXXX: 2010,2011
  • Harley Davidson Tri Glide Ultra Classic FLHTCUTG: 2009-2016

Specifications

SKU: SS330-0343
Model: 330-0343
Brand: S&S Cycle
Shipping Weight: 1.8800

Reviews

Be The First To Review This Product!

Help other EasyR Australia users shop smarter by writing reviews for products you have purchased.

Write a review