Zodiac Z930140 Gas Tank Smooth Steel w/Screw Bung

GAS TANK 4 GAL SMOOTH ONE PIECE 3" STRETCHED FITS HARLEY DAVIDSON

Fits Custom applications, uses screw in gas cap - (not included) holds approx 4 gallons.

No expense was spared in the construction and finish quality of these gas tanks.

Instead of the usual butt welded construction they incorporate joggle lap and lap joints through out.

This results in a much stronger gas tank without the worry of compromising the structural strength while providing a smooth surface finish.

The joggle lap joints also allow the tunnel plate to be sunken below the bottom surface of the tank making grinding of the welds unnecessary.

The tank is mounted to the frame using the supplied weld on brackets.

When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isloates it from vibration and gives a nice flush look.

The gas tank has a grey phosphate etched finish to help prevent corrosion and to give a good surface for primers to adhere.

Comes with weld to frame brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16”(22mm) petcock outlet, stainless breather tube and stainless rear mounted gas crossovers tapped for 1/8”- 27 NPT unions.

Gas tank has a capacity of approx 4 gallons (14ltr)

Smoothie One Piece 3”Stretched Custom Gas Tank Overall length : 22.24” Tunnel length : 19.21” Seat pocket length : 3.03” Tunnel width : 3.48” Overall width : 14.00” Height : 9.3”

Note : Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mountings including weld on mounting brackets. We recommend a qualified welder mounts the brackets to the frame.

(Z930140)