Rinehart Racing Exhaust
SKU: RIN-200-0300C
Rinehart Racing RIN-200-0300C 2-1 Exhaust System Chrome w/Chrome End Cap for Dyna 06-17
Description
Description for Rinehart Racing 2-into-1 Exhaust Chrome with Chrome End Cap
Please note: This image is just a reference. Heat shield inside the box is different to heat shield pictured.
Step up your H-D Touring performance with Rinehart's 2-into-1 exhaust system as the stepped header allows for a significant increase across the ranges especially within the low and mid-range. The 2-into-1 system retains a classic and sleek look that never goes out of style while giving you the Rinehart sound that has been known and loved by many.• This system features the same race-proven Stepped-headers, Anti-reversion louvers and patented baffle technology as our 2-into-1 systems for the big baggers
• A classic single-muffler design, updated with our 4" canister, providing significant horsepower and torque gains over the competition, while maintaining that distinctive, deep, aggressive Rinehart Racing sound
• Features 18mmports for easy dyno tuning
• Bung adapter kit 544-696 required for all 2012 and up models
• 2-into-1 muffler also works with our Moto Series end caps
• Includes all mounting hardware and installation instructions
• American Made Pipes for American Made Bikes
Product Specs for Rinehart Racing 2-into-1 Exhaust Chrome with Chrome End Cap
Baffle: | Included |
---|---|
Color: | Chrome |
End Cap Or Tip Color: | Chrome |
End Cap Or Tip Material: | Aluminum |
End Cap Or Tip Style: | Straight Cut |
Exhaust System: | 2-into-1 |
Head Pipe Color: | Chrome |
Head Pipe Diameter: | 1-3/4" |
Head Pipe Material: | Steel |
Heat Shield: | Included |
Manufacturer Part Number: | 200-0300C |
Muffler Color: | Chrome |
Muffler Diameter: | 4" |
Muffler Material: | Steel |
Muffler Style: | Straight |
O2 Sensor Plugs: | Included |
O2 Sensor Size: | 12mm and 18mm |
Sold in Units: | Each |
Warehouse Part Number: | RIN-200-0300C |
Note: Please see U.S. EPA and your respective state and local regulations to confirm noise and emission compliance.
Important Exhaust Notes:
• Note: With any new exhaust, we recommend changes to carburetor jetting or use of an aftermarket fuel injection control module.
• There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. No refunds on exhaust pipes once motorcycle is started unless there’s a manufacturer’s defect.
• Flanges and retaining rings are not included with most aftermarket exhaust for 1984-2013 Evolution and Twin Cam models. Re-use your existing hardware, or purchase replacement hardware.
(RIN-200-0300C)
Fitment
Fitment Notes & Exceptions
- Exhaust has 18mm oxygen sensor ports & plugs
- End cap logo may not match image, may be engraved or printed
**Please Note: The fitment information below has been generated as a guide and may not be 100% accurate. Please contact us if you require further assistance.
- Harley Davidson Dyna Fat Bob CVO/SE FXDFSE: 2009,2010
- Harley Davidson Dyna Fat Bob FXDF: 2008-2017
- Harley Davidson Dyna Low Rider FXDL/I: 2006-2017
- Harley Davidson Dyna Low Rider S FXDLS: 2016,2017
- Harley Davidson Dyna Street Bob FXDB/I: 2006-2017
- Harley Davidson Dyna Super Glide Custom FXDC/I: 2006-2014
- Harley Davidson Dyna Super Glide CVO/SE FXDSE: 2007
- Harley Davidson Dyna Super Glide CVO/SE FXDSE2: 2008
- Harley Davidson Dyna Super Glide FXD/I: 2006,2007,2008,2009,2010
- Harley Davidson Dyna Switchback FLD: 2012,2013,2014,2015,2016
- Harley Davidson Dyna Wide Glide FXDWG/I: 2006-2017
Specifications
Reviews
Be The First To Review This Product!
Help other EasyR Australia users shop smarter by writing reviews for products you have purchased.