S&S Cycle SS106-0352 132T x 1-1/2" Wide Final Drive Belt for Softail 86-88 w/70T Pulley/FXR 89-93 w/61T Pulley/Touring 89-93 w/61T Pulley

Description for S&S Cycle 132 Tooth 1-1/2" Wide High Strength Final Drive Belt

• S&S Cycle High Strength Final Drive Belts by Gates are available with 14mm pitch in 1-1/2" and 1-1/8" widths

• All belts have a 14mm tooth pitch, and are made of the super strong Gates carbon X3N material

• One year Limited Manufactures warranty

Product Details

Features & Benefits:-

* Also Fits Softail 1986-1999 with 1-1/2in. x 70 Tooth Rear Pulley

* Also Fits FXR 1986-1994 with 1-1/2in. x 61 Tooth Rear Pulley

* Also Fits FLH 1986-1999 with 1-1/2in. x 61 Tooth Rear Pulley

* Super strong X3N carbon cord material.

* Significantly stronger than the Aramid material OEM final belts.

Tech Tips:-

* Count the Teeth on your Belt before Ordering!

* Avoid Improper Handling – Twisting, Pinching, Kinking or Prying.

* Avoid Improper Belt Alignment, toe in or toe out, chamber tilt left or tilt right, vehicle alignment early model FXR’s, FXD’s, FLT’s.

* Avoid Improper belt tension: too tight, too loose.

* Avoid Worn out pulleys not replaced at time of belt replacement.

* Avoid Oil leaks that cause oil to penetrate belt, chemical reaction to Belts.

* Avoid Shocks that cause improper belt tension due to raising or lowering.

* Avoid Broken Shocks or Shock Studs.

* Avoid Fa ilure to properly readjust new belt as it seats into pulleys at 800 and 1600 klms, and at regular services.

* Avoid Road debris, rocks, metal, glass, tire tread or re-tread pieces, etc.

* Avoid Failure to properly readjust belt on bikes overloaded for long trips.

* Avoid Chemicals used to clean motorcycle – chemical reaction to Belts.

* Avoid Racing, burnouts, wheel stands, all affect tension & alignment.

* Avoid Worn or broken pulley isolator rubber/s.

* Avoid Reverse Over Bending of Belt.

* Avoid Belt that Rubs or has Contact with the Belt Passage Way.

Proudly Made in the USA by S&S Cycle !