S&S Cycle SS11-0408 Super E Carburettor Kit for Sportster 86-90

S&S Cycle

SKU: SS11-0408

S&S Cycle SS11-0408 Super E Carburettor Kit for Sportster 86-90

Available - Ready For Delivery Only 3 Left!

$1,418.00

Or 4 payments of $354.50 with

SS11-0408

Description

Description for

• Designed exclusively for Harley-Davidson Big Twin and Sportster engines

• Butterfly-type carbs with a fully adjustable idle mixture screw and a changeable mid-range and high speed jet

• Fully adjustable accelerator pump and a variable enrichment/fast idle device for improved throttle response, engine starting and warm-ups

• Super E has a 1 7/8" (47.6mm) throat at the butterfly and a 1 9/16" (39.6mm) venturi and is recommended for use on any displacement Big Twin or Sportster

• Super G has a 2 1/16" (52.3mm) throat at the butterfly and a 1 3/4" (44.5mm) venturi and is recommended for use on 74 cubic inch engines and larger where high performance modifications have been done or are planned (not recommended for smaller, lower compression engines)

• If you are not sure which carburetor to use, we suggest the 1 7/8" Super E

• Each complete carb kit includes: one S&S Super E or Super G gas carburetor, one S&S teardrop air cleaner assembly, one manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet, two main jets, VOES tubing (when applicable), and installation and jetting instructions


NOTE: S&S Super E and G carburetors require the use of a two-cable, pull open-pull closed throttle assembly. If your bike is not equipped with one, a two-cable system must be purchased separately.

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.


Product Specs for

Part #:SS11-0408
Mfg #:11-0408
TypeCarburetor - Butterfly
UnitsKit
Weight6.81 lbs

(SS11-0408)

Fitment

Fitment Notes & Exceptions

  • S&S Super E carburetors require the use of a two-cable, push/pull throttle assembly
  • S&S kits are compatible with stock cables
  • Recommended for racing only
  • Carburetor is not legal for use in California or in other states where similar pollution laws may apply

 

**Please Note: The fitment information below has been generated as a guide and may not be 100% accurate. Please contact us if you require further assistance.

  • Harley Davidson Sportster Deluxe XLH883DLX: 1989,1990
  • Harley Davidson Sportster Hugger XLH883HUG: 1988,1989,1990
  • Harley Davidson Sportster XLH1100: 1986,1987,1988
  • Harley Davidson Sportster XLH1200: 1988,1989,1990
  • Harley Davidson Sportster XLH883: 1986,1987,1988,1989,1990

Specifications

SKU: SS11-0408
Model: 11-0408
Barcode: Does not apply
Brand: S&S Cycle
Shipping Weight: 3.0900

Reviews

Be The First To Review This Product!

Help other EasyR Australia users shop smarter by writing reviews for products you have purchased.

Write a review