Feuling FE-7098 HP+ Oiling System for Milwaukee-Eight 17-Up w/Water Cooled Engine

• Quieter and smoother engine operation

• Increase oil pressure, scavenge volume and engine oil flow

• 15-25 degree cooler engine temperatures

• 15-30 degree cooler oil temperatures

• 10-30 more PSI of oil pressure

• Eliminate wet sumping, blow by and oily air cleaners

• Test results show 2 horsepower gain and 2 ft./lb. of torque gain to the rear wheel

• HP+ Series kits include billet 6061 aluminum high-volume oil pump, high flow cam plate, HP+® hydraulic roller lifters and cam installation kit

• HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates. FEULING^® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.

• Oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. The FEULING^® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems. 

Note:

• For TWIN-COOLED™ MOTORS

(1) Red camplate

(1) Oil pump

(4) Lifters

(1) Roller bearing

(1) #263 Threadlocker

(1) Tube engine assembly lube

(1) 3/8"-24 x 1-3/4" Flange 12-point external wrenching head bolt

(1) 3/8" Spacer

(1) 5/16"-18 x 3/4" Flange 12-point external wrenching head bolt

(1) 5/16" Spacer

(3) Engine case gasket

(2) Exhaust gaskets

(20) O-rings(assorted sizes)

(2) Rocker box gaskets

Instructions