$1,499.95
Or 4 payments of $374.99 with 
Description
Description for Vance & Hines Pro Pipe Exhaust System - 17571
• Pro Pipe provides all the bling along with the bang
• Includes tuned length stepped headers with a highly efficient merge collector that feeds into the stepped megaphone design
• Complete with header and collector heat shields, as well as a shield over the first step of the megaphone; also features a CNC-machined chrome plated billet end cap
• New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12 Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
Included Items:
(1) 2-1 Header
(1) Pro pipe
(1) Front heat shield
(1) Rear heat shield
(1) Collector heat shield
(1) Megaphone heat shield
(1) Rear bracket
(1) Torca band clamp
(4) #20 Hose clamp
(1) #44 Hose clamp
(2) 5/16-18 x 5/8 Serrated flange bolts
(2) 3/8 x 3/4" Flange bolts
(1) #56 Hose clamp
(1) Dogbone nut plate
(4) #24 Hose clamps
(1) 3/8-16 x 1/2" SHCS
(1) Instructions
Note: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information
Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available
Recommended Vance & Hines fuel management module: Fuel Pak FP3 For CAN Bus models only (Touring, Softail, Dyna and Sportster). Not compatible with V-Rod models
Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEM/LUBES category for products that will help prevent or remove blueing.
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Product Specs for Vance & Hines Pro Pipe Exhaust System - 17571
| Part #: | V17571 |
|---|---|
| Mfg #: | 17571 |
| Color | Chrome |
| Finish | Chrome |
| Style | Tapered Tip |
| Type | 2-Into-1 System |
| Units | Each |
| Weight | 28.05 lbs |
(V17571)
Fitment
**Please Note: The fitment information below has been generated as a guide and may not be 100% accurate. Please contact us if you require further assistance.
- Harley-Davidson Heritage Softail Classic - FLSTC : 2012-2017
- Harley-Davidson Softail Blackline - FXS : 2012-2013
- Harley-Davidson Softail Convertible CVO/SE - FLSTSE 3 : 2012
- Harley-Davidson Softail Deluxe - FLSTN : 2012-2017
- Harley-Davidson Softail Deluxe CVO/SE - FLSTNSE : 2014-2015
- Harley-Davidson Softail Fat Boy - FLSTF : 2012-2017
- Harley-Davidson Softail Fat Boy Lo - FLSTFB : 2012-2016
- Harley-Davidson Softail Fat Boy S - FLSTFBS : 2016-2017
- Harley-Davidson Softail Slim - FLS : 2012-2017
- Harley-Davidson Softail Slim S - FLSS : 2016-2017
Specifications
Reviews
Be The First To Review This Product!
Help other EasyR Australia users shop smarter by writing reviews for products you have purchased.
